CVT (CONTINUOUSLY VARIABLE TRANSAXLE) FLUID REPLACEMENT [DJVA-EL]

id051901285400

Warning

•  Drain the CVT fluid while the CVT fluid temperature is low, otherwise it can cause serve burns or serious injury.

Note

•  The following procedure is for draining the CVT fluid from the oil pan, not for complete replacement of the CVT fluid.

1.  Remove the overflow plug and gasket from the oil pan.

am2zzw00006749

2.  Remove the overflow tube using a hexagonal wrench, and drain the CVT fluid.

am2zzw00006750

3.  Install the overflow tube to the oil pan using a hexagonal wrench.

am2zzw00006751

Caution

•  Install the overflow tube to the specified tightening torque. If the overflow tube is not tightened to the specified torque, the CVT fluid cannot be adjusted to the specified level.

4.  Adjust the CVT fluid level. (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) FLUID LEVEL ADJUSTMENT [DJVA-EL].)