TCM LEARNING [DJVA-EL]

id051901287200

Note

•  The TCM learning function includes the oil pressure sensor and inclination sensor learning. For this reason, if replacing a specific part, it is necessary to perform TCM learning using the M-MDS.

•  If the TCM or inclination sensor are replaced, always perform inclination sensor learning.

•  If the CVT or, the TCM or oil pressure sensor are replaced, always perform oil pressure sensor learning.

1.  Connect the M-MDS (IDS) to the DLC-2.

am2zzw00004260

2.  After the vehicle is identified, select the following items from the initialization screen of the IDS.

(1)  Select the ”Powertrain”.

(2)  Select “Transmission”.

3.  Select the applicable function corresponding to the part being replaced and perform the work following the on-screen instructions.

Replace parts	Procedure 1	Procedure 2
Oil pressure sensor	Clearing of oil pressure sensor learning	Oil pressure sensor learning
Grade sensor	Clearing of grade sensor learning	Grade sensor learning
TCM	Grade sensor learning	Oil pressure sensor learning
CVT	Clearing of oil pressure sensor learning	Oil pressure sensor learning