DTC U0100:00

id060200812300

DTC

U0100:00

CAN system communication error

DETECTION CONDITION

•  Signal from PCM via CAN communication is interrupted

POSSIBLE CAUSE

•  Signal error from PCM

•  Malfunction in CAN communication line between EPS CM and PCM

Diagnostic Procedure

• Perform inspection according to the diagnostic procedure in Section 09 (See DTC TABLE [MULTIPLEX COMMUNICATION SYSTEM (L.H.D.)].) (See DTC TABLE [MULTIPLEX COMMUNICATION SYSTEM (R.H.D.)].)

DTC	U0100:00		CAN system communication error
DETECTION CONDITION		• Signal from PCM via CAN communication is interrupted
POSSIBLE CAUSE		• Signal error from PCM • Malfunction in CAN communication line between EPS CM and PCM