MAGNETIC CLUTCH ADJUSTMENT [FULL-AUTO AIR CONDITIONER]

id0740a1800500

1. Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a thickness gauge.

MZR 1.3, MZR 1.5 (Type A^*1)

am2zzw00000907

MZR 1.3, MZR 1.5 (Type B^*2)

am2zzw00007074

MZ-CD 1.6

am2zzw00002973

2. Verify that the clearance is within the specification.

• If not within the specification, remove the pressure plate and adjust the clearance by changing the shim (0.2 mm {0.008 in}, 0.5 mm {0.02 in}) or the number of shims.

Magnetic clutch clearance

0.3—0.5 mm {0.012—0.019 in} (MZR 1.3, MZR 1.5 (Type A^*1))

0.3—0.6 mm {0.012—0.023 in} (MZR 1.3, MZR 1.5 (Type B^*2))

0.35—0.75 mm {0.014—0.029 in} (MZ-CD 1.6)

acxuuw00001570

*1: Applied VIN (assumed)

European (L.H.D. U.K.) specs.

• JMZ DE1452*# 400001—471225

• JMZ DE1455*# 400001—471225

• JMZ DE14K2*# 400001—471225

• JMZ DEA452*# 400001—471268

• JMZ DEA455*# 400001—471268

• JMZ DEA4J2*# 400001—471268

• JMZ DEA4K2*# 400001—471268

• JMZ DEA352*# 300001—306800

• JMZ DEA3J2*# 300001—306800

• JMZ DEA3K2*# 300001—306800

General (L.H.D.) specs.

• JM7 DE10J2*0 200001—223093

• JM7 DE10Y2*0 200001—223093

General (R.H.D.) specs. (Australia)

• JM0 DE10Y2*0 200001—223093

General (R.H.D.) specs. (Except Australia)

• JM6 DE10J2*0 200001—223093

• JM6 DE10Y2*0 200001—223093

*2: Applied VIN (assumed)

European (L.H.D. U.K.) specs.

• JMZ DE1452*# 471226—

• JMZ DE1455*# 471226—

• JMZ DE14K2*# 471226—

• JMZ DEA452*# 471269—

• JMZ DEA455*# 471269—

• JMZ DEA4J2*# 471269—

• JMZ DEA4K2*# 471269—

• JMZ DEA352*# 306801—

• JMZ DEA3J2*# 306801—

• JMZ DEA3K2*# 306801—

General (L.H.D.) specs.

• JM7 DE10J2*0 223094—

• JM7 DE10Y2*0 223094—

General (R.H.D.) specs. (Australia)

• JM0 DE10Y2*0 223094—

General (R.H.D.) specs. (Except Australia)

• JM6 DE10J2*0 223094—

• JM6 DE10Y2*0 223094—