PID/DATA MONITOR TABLE


id080200320300

PID name (definition)

Unit/Operation

Operation Status (Reference)

BUCKLE_D
(Driver-side buckle switch status)
Unbuckled/Buckled
•  Driver-side front seat belt fastened (Driver-side buckle switch off) Buckled
•  Driver-side front seat belt not fastened (Driver-side buckle switch on) Unbuckled
BUCKLE_P
(Passenger-side buckle switch status)
Unbuckled/Buckled
•  Passenger-side front seat belt fastened (Passenger-side buckle switch off) Buckled
•  Passenger-side front seat belt not fastened (Passenger-side buckle switch on) Unbuckled
ENG_ST
(Engine status)
Off/Ready/Cranking/Running/Stalled/
After Run/Shutdown/
Not Defined
•  Ignition switch is at LOCK: Off
•  Ignition switch is at ON: Ready
•  Ignition switch is at START: Cranking
•  Vehicle driven: Running
•  After driving, engine stopped: Stalled
•  After driving, engine stopped: After Run
•  After driving, engine stopped: Shutdown
•  Engine status unknown: Defined
P_BELT_SSR
(Occupancy sensor status)
Off/On
•  Occupant seated in passenger-side front seat (occupancy sensor on): On
•  Occupant not seated in passenger-side front seat (occupancy sensor off): Off
RES_AB_D
(Driver-side air bag module resistance)
ohm
Continuous: 1.7–4.3 ohm
RES_AB_P
(Passenger-side air bag module resistance)
ohm
Continuous: 1.5–3.3 ohm
RES_CAB_D
(Driver-side curtain air bag module resistance)
ohm
Continuous: 1.5–3.6 ohm
RES_CAB_P
(Passenger-side curtain air bag module resistance)
ohm
Continuous: 1.5–3.6 ohm
RES_PT_D
(Driver-side pretensioner seat belt resistance)
ohm
Continuous: 1.7–3.5 ohm
RES_PT_P
(Passenger-side pretensioner seat belt resistance)
ohm
Continuous: 1.7–3.5 ohm
RES_SAB_D
(Driver-side side air bag module resistance)
ohm
Continuous: 1.5–3.6 ohm
RES_SAB_P
(Passenger-side side air bag module resistance)
ohm
Continuous: 1.5–3.6 ohm
VPWR
(SAS control module power voltage)
V
The ignition switch is at ON: B+
VSPD
(Vehicle speed)
KPH
•  Vehicle stopped: 0 KPH (0 MPH)
•  Vehicle driven: Displays vehicle speed
PAD_IL_OFF
Note
•  Displayed but not used in the inspection.
PAD_SW
Note
•  Displayed but not used in the inspection.
PAD_SW_FLT
Note
•  Displayed but not used in the inspection.