DTC INSPECTION [INSTRUMENT CLUSTER]

id0902e8345400

1.  Connect the M-MDS (IDS) to the DLC-2.

am2zzw00002508

2.  After the vehicle is identified, select the following items from the initialization screen of the IDS.

(1)  Select “Self Test”.
(2)  Select “Modules”.
(3)  Select “IC”.

3.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

Snapshot Data Table
Note
•  Snapshot data items are not displayed, according to detected DTC.

Snapshot data item

Data contents

Unit

Display content
TOTAL_DIST
Odometer reading when DTC detected
km
Odometer reading when DTC detected (four-digit number indicated)

4.  After completion of repairs, clear all DTCs stored in the instrument cluster. (See CLEARING DTC [INSTRUMENT CLUSTER].)