POWER WINDOW SYSTEM INITIALIZATION PROCEDURE


id091200413800

Note
•  If the following operations have been performed, initial setting is reset, and auto up/down and two-step down operation are disabled. Therefore, performing initial setting is necessary.
―  Negative battery cable is disconnected.
―  Power window main switch connector is disconnected.
―  Power window system power supply fuse is removed.

1.  Switch the ignition ON.

2.  Press the driver-side switch to fully open the door glass.

3.  Pull up the driver-side switch to the manual-up position to fully close the door glass and keep holding the switch up at the position for approx. 2 s.