KEYLESS CONTROL MODULE CONFIGURATION [ADVANCED KEYLESS AND START SYSTEM]

id0914004394b0

1.  Connect the M-MDS (IDS) to the DLC-2.

am2zzw00002191

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select the “Module Programing”.

2.  Select “Programmable Module Installation”.

3.  Select menu in the “RKE”.

3.  Perform the configuration according to the directions on the screen.

4.  Retrieve DTCs by the M-MDS, then verify that there is no DTC present.

•  If a DTC (s) is detected, perform the applicable DTC inspection. (See DTC INSPECTION [ADVANCED KEYLESS AND START SYSTEM].)