KEYLESS BEEPER INSPECTION [ADVANCED KEYLESS AND START SYSTEM]

id0914004416b0

1.  Disconnect the negative battery cable.

2.  Remove the rear combination light. (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)

3.  Remove the splash shield. (See SPLASH SHIELD REMOVAL/INSTALLATION.)

4.  Remove the rear bumper. (See REAR BUMPER REMOVAL/INSTALLATION.)

5.  Remove the keyless beeper. (See KEYLESS BEEPER REMOVAL/INSTALLATION [ADVANCED KEYLESS AND START SYSTEM].)

6.  Apply battery positive voltage and connect the ground to each terminal and verify the keyless beeper sound operation.

•  If the beep sound cannot be verified, replace the keyless beeper.

am2zzw00006881