FRONT DOOR TRIM REMOVAL/INSTALLATION [3HB]

id0917004597z3

1.  Disconnect the negative battery cable.

2.  Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION)

3.  Pull the cover of inner handle while remove the tabs.

am2zzw00003417

4.  Remove the screw.

5.  Pull in the direction of the arrow shown in the figure and remove clips A and B from the door inner panel using a fastener remover.

am2zzw00003418

6.  Remove the front door trim in the direction of the arrow shown in the figure.

am2zzw00003419

7.  Remove the inner handle and move the front door trim in the direction of the arrow shown in the figure.

am2zzw00003420

8.  Turn the inner handle 90° in the direction of the arrow and remove it from the front door trim.

am2zzw00003421

9.  Disconnect the driver-side power outer mirror switch connector, driver-side power window main switch connector, and passenger-side power window subswitch connector.

10.  Install in the reverse order of removal.