LIGHTING SYSTEM PERSONALIZATION FEATURES

id091800106300

•  A personalization features that switches the activation/deactivation of each function has been adopted.
•  Adjustments and settings for the system functions can be done as follows.
•  Mazda Modular Diagnostic System (M-MDS) is required to perform the setting. Refer to the Workshop Manual for the detailed setting procedure.

Auto light system personalization features

Mazda Modular Diagnostic System (M-MDS) display

Function

Initial setting

Setting content

Control unit
Rain light sensor illuminance setting
Auto light sensitivity can be changed.
Standard (Except Japan)
Extra High (Except Japan)/High (Except Japan)/Standard (Except Japan)/Low (Except Japan)/Extra Low (Except Japan)
BCM

Note
•  Other than the above conditions, an “Japan Only” command is also displayed, however, do not select the command because it is for use other than in Japan.
•  If the mode is set to “Extra High (Except Japan)” and “High (Except Japan)”, the illumination level for illuminating the TNS and headlight increases. Therefore, the TNS and headlights illuminate when the ambient light is brighter than when the level is set to “Standard (Except Japan)”. In addition, if the mode is set to “Low (Except Japan)” and “Extra Low (Except Japan)”, the illumination level for illuminating the TNS and headlights decreases. Therefore, the TNS and headlights illuminate when the ambient light is lower than when the level is set to “Standard (Except Japan)”.