INTERIOR LIGHT BULB REMOVAL/INSTALLATION

id091800467200

Vehicles With Intruder Sensor

1.  Disconnect the negative battery cable.

2.  Insert a tape-wrapped flathead screwdriver into the service hole, push it in the direction indicated by the arrow, and remove the lens.

am2zzw00002253

3.  Remove the interior light bulbs.

4.  Install in the reverse order of removal.

Vehicles Without Intruder Sensor

1.  Disconnect the negative battery cable.

2.  Insert a tape-wrapped flathead screwdriver into the service hole, push it in the direction indicated by the arrow, and remove the lens.

am2zzw00002500

3.  Remove the interior light bulb.

4.  Install in the reverse order of removal.