INSTRUMENT CLUSTER REMOVAL/INSTALLATION

id092200496100

MZR 1.3, MZR 1.5

Caution

• When replacing the instrument cluster, always perform the configuration procedure before removing the instrument cluster. Replacing the instrument cluster without performing the configuration procedure will result in system malfunction.

1. When replacing the instrument cluster, always perform the configuration procedure. (See INSTRUMENT CLUSTER CONFIGURATION.)

2. Disconnect the negative battery cable.

3. Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION.)

4. Remove in the order indicated in the table.

am2zzw00002601

1

Screw

2

Connector

3

Instrument cluster

4

Wiring harness clip

5. Install in the reverse order of removal.

6. Program the immobilizer system-related parts when replacing the instrument cluster. (With keyless entry system) (See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING [KEYLESS ENTRY SYSTEM].)

Caution

• Place the removed instrument cluster with the display surface facing upward. Otherwise grease could leak from the meter unit.

am2zzw00001896

MZ-CD 1.6

Caution

1. When replacing the instrument cluster, always perform the configuration procedure. (See INSTRUMENT CLUSTER CONFIGURATION.)

2. Disconnect the negative battery cable.

3. Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION.)

4. Remove in the order indicated in the table.

am2zzw00002640

1

Screw

2

Connector

3

Instrument cluster

5. Install in the reverse order of removal.

6. Perform programming of immobilizer system-related parts. (With keyless entry system) (See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING [KEYLESS ENTRY SYSTEM].)

Caution

• Place the removed instrument cluster with the display surface facing upward. Otherwise grease could leak from the meter unit.

am2zzw00001896