INAPPROPRIATE OPERATION AND CONTROL RECORD [PCM (SKYACTIV-G (E))]

id0102t40429u1

How to Use

Note

• Because the inappropriate operation and control record cannot be cleared, always check the odometer value and verify that repairs have not already been performed.

• If any inappropriate operation and control record is displayed, refer to the corresponding troubleshooting for the inappropriate operation and control code to explain to the customer, and perform malfunction diagnosis. (See Inappropriate Operation and Control Code Table)

Operation Procedure

1. Connect the M-MDS to the DLC-2.

2. Switch the ignition ON (engine off or on).

3. Perform the following procedure using the M-MDS.

1. Press [Start] for the vehicle identification.

2. Press the [Toolbox] tab.

3. Press the [Diagnosis] icon.

4. Press [Operational records].

5. Press [ENGINE].

6. Press [Reading Operation records of vehicle protection against internal failure].

4. For details regarding the procedure, follow the instructions indicated on the M-MDS.

Inappropriate Operation and Control Code Table

Inappropriate operation and control code

Inappropriate operation and control code type

Reference

0x30

Temperature restriction control

(See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x30 (TEMPERATURE RESTRICTION CONTROL) [PCM (SKYACTIV-G)].)

0x42^*1

Unusual connection with a generator

(See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x42 (UNUSUAL CONNECTION WITH A GENERATOR) [PCM (SKYACTIV-G)].)

0x43

Vehicles with Mazda M Hybrid:

• Unusual voltage of a battery or capacitor

Vehicles without Mazda M Hybrid:

• Unusual voltage of a battery

(See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x43 (UNUSUAL VOLTAGE OF A BATTERY OR CAPACITOR) [PCM (SKYACTIV-G)].)

(See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x43 (UNUSUAL VOLTAGE OF A BATTERY) [PCM (SKYACTIV-G)].)

Inappropriate operation and control code	Inappropriate operation and control code type	Reference
0x30	Temperature restriction control	(See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x30 (TEMPERATURE RESTRICTION CONTROL) [PCM (SKYACTIV-G)].)
0x42^*1	Unusual connection with a generator	(See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x42 (UNUSUAL CONNECTION WITH A GENERATOR) [PCM (SKYACTIV-G)].)
0x43	Vehicles with Mazda M Hybrid: • Unusual voltage of a battery or capacitor Vehicles without Mazda M Hybrid: • Unusual voltage of a battery	(See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x43 (UNUSUAL VOLTAGE OF A BATTERY OR CAPACITOR) [PCM (SKYACTIV-G)].) (See INAPPROPRIATE OPERATION AND CONTROL RECORD 0x43 (UNUSUAL VOLTAGE OF A BATTERY) [PCM (SKYACTIV-G)].)

*1 :Vehicles with Mazda M Hybrid