INAPPROPRIATE OPERATION AND CONTROL RECORD [PCM (SKYACTIV-D)]

id0102t5042900


How to Use

Note
•  Because the inappropriate operation and control record cannot be cleared, always check the odometer value and verify that repairs have not already been performed.
•  If any inappropriate operation and control record is displayed, refer to the corresponding troubleshooting for the inappropriate operation and control code to explain to the customer, and perform malfunction diagnosis. (See Inappropriate Operation and Control Code Table)

Operation Procedure

1.  Connect the M-MDS to the DLC-2.

2.  Switch the ignition ON (engine off or on).

3.  Perform the following procedure using the M-MDS.

1.  Press [Start] for the vehicle identification.
2.  Press the [Toolbox] tab.
3.  Press the [Diagnosis] icon.
4.  Press [Operational records].
5.  Press [ENGINE].
6.  Press [Reading Operation records of vehicle protection against internal failure].

4.  Display the DTC store record history according to the screen instructions.


Inappropriate Operation and Control Code Table

Inappropriate operation and control code

Inappropriate operation and control type
0x42
Unusual connection with a generator
0x43
Unusual voltage of a battery or capacitor
0x51
Cold condition damage prevention control
0x52
Injection amount limiting control depends on excess rotation speed of turbocharger