ENGINE OIL PRESSURE SENSOR INSPECTION [SKYACTIV-D 1.8]


id0140s1216900


Voltage Inspection

Note
•  The engine oil temperature sensor and engine oil pressure sensor cannot be removed as a single unit. When replacing the engine oil temperature sensor or engine oil pressure sensor, replace the engine oil temperature sensor/engine oil pressure sensor.

1.  Switch the ignition ON (engine off).

2.  Connect the M-MDS to the DLC-2.

3.  Start the engine.

4.  Access the PCM PID/DATA monitor item [OIL_PRES] using the M-MDS. (See PID/DATA MONITOR INSPECTION.)(See PID/DATA MONITOR TABLE [PCM (SKYACTIV-D)].)

5.  Verify that the PID [OIL_PRES] value increases when the accelerator pedal is depressed.

•  If it cannot be verified, replace the engine oil temperature sensor/engine oil pressure sensor.(See ENGINE OIL TEMPERATURE SENSOR/ENGINE OIL PRESSURE SENSOR REMOVAL/INSTALLATION [SKYACTIV-D 1.8].)

Specification (Reference)

am2zzw00011365