DTC U0140:00 [SAS CONTROL MODULE]

id0802g6011800

Note
•  The SRS air bag system can be identified by whether or not the seat track position sensor is present.
―  Standard deployment control system: Without seat track position sensor
―  Two-step deployment control system: With seat track position sensor

Outline

System malfunction location

Communication error with BCM
Detection condition
•  SAS control module could not receive CAN signal from the BCM.
Fail-safe
•  Not applicable
Possible cause
•  Malfunction in CAN line between the SAS control module and BCM
•  BCM malfunction
System wiring diagram
•  Not applicable
Connector diagram
•  Not applicable


Diagnostic Procedure

•  Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system.
(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)