SAS CONTROL MODULE SENSOR INITIALIZATION [STANDARD DEPLOYMENT CONTROL SYSTEM]

id0810b2810200

Note

•  The SAS control module sensor initialization (0 point learning of yaw rate sensor) can be performed using the M-MDS. For details, follow the instructions displayed on the M-MDS.

•  The SRS air bag system can be identified by whether or not the seat track position sensor is present.

―  Standard deployment control system: Without seat track position sensor

―  Two-step deployment control system: With seat track position sensor

1.  Connect the M-MDS.

2.  Perform the SAS control module sensor initialization (0 position learning of yaw rate sensor).