DTC U0151:00 [BODY CONTROL MODULE (BCM)]


id0902r7096300


Outline

System malfunction location

Communication error with SAS control module

Detection condition
•  The body control module (BCM) cannot receive CAN signal from the SAS control module.
Fail-safe
•  Sets to default signal.
Possible cause
•  Malfunction in CAN communication line between SAS control module and body control module (BCM)
System wiring diagram
Not applicable


Diagnostic Procedure

•  Perform an inspection in accordance with the multiplex communication system diagnostic procedure. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)