REAR WINDOW DEFOGGER/GLASS ANTENNA REPAIR

id091200020500

1.  Clean the rear window defogger/glass antenna using isopropyl alcohol.

2.  Attach tape to both sides of the rear window defogger/glass antenna.

am3uuw00014903

3.  Using a small brush or marking pen, apply silver paint.

4.  After 2—3 min, carefully remove the tape without damaging the applied area.

Caution

•  Do not operate the rear window defogger until the paint is completely dry. It may cause other malfunctions if it is used before the paint is dry.

5.  Dry the repaired part according to the following procedure.

•  When the room temperature is 25 °C {77 °F}, leave it as it is for 24 h.

•  When a heat gun is used, dry with the 150 °C {302 °F}air for 30 min.