TRUNK LID LATCH AND RELEASE ACTUATOR INSPECTION

id091400513400

Trunk Lid Release Actuator Inspection

1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2. Remove the trunk lid latch and release actuator. (See TRUNK LID LATCH AND RELEASE ACTUATOR REMOVAL/INSTALLATION.)

3. Press in the latch lever of the trunk lid latch and release actuator using a flathead screwdriver, and set it to the latched condition.

4. Connect terminal A to the positive battery voltage, connect terminal B to the ground, and verify that the latch lever is released and the condition changes to the unlatch condition.

am3zzw00027210

B+ terminal

Ground terminal

Operation

A

B

Release

B+ terminal	Ground terminal	Operation
A	B	Release

• If the operation cannot be verified, replace the trunk lid latch and release actuator. (See TRUNK LID LATCH AND RELEASE ACTUATOR REMOVAL/INSTALLATION.)

Trunk Lid Latch Switch Inspection

1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2. Remove the trunk lid latch and release actuator. (See TRUNK LID LATCH AND RELEASE ACTUATOR REMOVAL/INSTALLATION.)

3. Verify that the continuity is as indicated in the table.

am3zzw00026316

• If not as indicated in the table, replace the trunk lid latch and release actuator. (See TRUNK LID LATCH AND RELEASE ACTUATOR REMOVAL/INSTALLATION.)

Note

• When inspecting the latch condition of the trunk lid latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.

am3uuw00010053