KEYLESS ANTENNA INSPECTION

id091400614900

Note

•  The integrity of the keyless antenna cannot be determined from a single part. When inspecting the keyless antenna, perform the following procedure.

1.  Connect the M-MDS to the DLC-2.

2.  Perform the DTC inspection for the body control module (BCM) and verify if any DTCs related to the keyless antenna is detected. (See DTC INSPECTION.)

•  If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [BODY CONTROL MODULE (BCM) (E)].)