TRUNK LID LIGHT INSPECTION [(E)]

id0918000163x2

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2.  Remove the trunk lid light from the body. (See TRUNK LID LIGHT REMOVAL/INSTALLATION.)

3.  Apply battery positive voltage and connect the ground to the trunk lid light terminals as indicated in the table below and verify that each light turns on normally.

am3zzw00029957

B+ Terminal	Ground Terminal	Condition
		Back-up light	Tail light	Rear fog light
A	E	turns ON	turns OFF	turns OFF
B	E	turns OFF	turns ON	turns OFF
D	E	turns OFF	turns OFF	turns ON

•  If each light does not turn on normally, replace the trunk lid light. (See TRUNK LID LIGHT REMOVAL/INSTALLATION.)