PACKAGE GUSSET REMOVAL [PANEL REPLACEMENT]

id098008820000

Symbol Mark

am3zzb00000385

Removal Procedure

1.  Drill the spot weld in the 1 location in area A shown in the figure.

2.  Using the belt sander, grind the arc welds in the 4 locations in area B shown in the figure from the interior.

3.  Drill the spot welds in the 6 locations in area C shown in the figure from the interior.

4.  Drill the spot welds in the 33 locations in area D shown in the figure from the interior.

Note

•  When drilling the spot welds in the 33 locations in area D shown in the figure, do not drill through-holes in consideration of the workability when installing.

am3zzb00000386

5.  Remove the package gusset.