PID/DATA MONITOR TABLE [360°VIEW MONITOR CONTROLE MODULE]
id1502c4063600
|
PID |
Unit/Operation |
Data contents |
Module control terminal |
|---|---|---|---|
|
BCAM_AIM_ANS
|
NONE/COMPLETE/ERROR
|
• NONE: Rear mount camera aiming is not performed.
• COMPLETE: Rear mount camera aiming is completed.
• ERROR: Rear mount camera aiming is not completed correctly.
|
—
|
|
BCAM_AIM_ANS_2
|
NONE/COMPLETE/ERROR
|
• NONE: Rear mount camera aiming is not performed.
• COMPLETE: Differences between aiming result of rear mount camera and configuration data is normal.
• ERROR: Differences between aiming result of rear mount camera and configuration data is not normal.
|
—
|
|
BCAM_AIM_ERROR_CODE
|
Factory Aiming : Completed/Factory Aiming : ECU Internal Error/Factory Aiming : Front Camera Power Supply Error/Factory Aiming : Rear Camera Power Supply Error/Factory Aiming : Left Camera Power Supply Error/Factory Aiming : Right Camera Power Supply Error/Factory Aiming : Front Camera Image Signal Error/Factory Aiming : Rear Camera Image Signal Error/Factory Aiming : Left Camera Image Signal Error/Factory Aiming : Right Camera Image Signal Error/Factory Aiming : Left Front Door Open/Factory Aiming : Left Rear Door Open /Factory Aiming : Right Front Door Open /Factory Aiming : Right Rear Door Open /Factory Aiming : Trunk/Liftgate Open /Factory Aiming : Neither "PARKED" Nor "NEUTRAL"/Factory Aiming : Front Camera Target A Not Detected/Factory Aiming : Front Camera Target B Not Detected/Factory Aiming : Rear Camera Target G Not Detected/Factory Aiming : Rear Camera Target H Not Detected/Factory Aiming : Left Camera Target
C Not Detected/Factory Aiming : Left Camera Target E Not Detected/Factory Aiming : Right Camera Target D Not Detected/Factory Aiming : Right Camera Target F Not Detected/Factory Aiming : Front Camera Analysis Error/Factory Aiming : Rear Camera Analysis Error/Factory Aiming : Left Camera Analysis Error/Factory Aiming : Right Camera Analysis Error/Dealer Aiming : Aiming Success/Dealer Aiming : Right Marker for Rear Camera Not Found/Dealer Aiming : Left Marker for Rear Camera Not Found /Dealer Aiming : Rear Marker for Left Camera Not Found /Dealer Aiming : Front Marker for Left Camera Not Found /Dealer Aiming : Left Marker for Front Camera Not Found /Dealer Aiming : Right Marker for Front Camera Not Found /Dealer Aiming : Front Marker for Right Camera Not Found /Dealer Aiming : Rear Marker for Right Camera Not Found /Dealer Aiming : Aiming Result Exceeds the Limit/Dealer Aiming : Aiming Not Performed/Dealer Aiming : Aiming Failed by Internal Memory Error/Dealer Aiming : Rear Camera
Image Not Input/Dealer Aiming : Left Camera Image Not Input/Dealer Aiming : Front Camera Image Not Input/Dealer Aiming : Right Camera Image Not Input/Dealer Aiming : Power Supply Error to Camera(s)
|
Displays detected error code after performing rear mount camera aiming
|
—
|
|
BCAM_AIM_ERROR_CODE_2
|
Factory Aiming : Completed/Factory Aiming : ECU Internal Error/Factory Aiming : Front Camera Power Supply Error/Factory Aiming : Rear Camera Power Supply Error/Factory Aiming : Left Camera Power Supply Error/Factory Aiming : Right Camera Power Supply Error/Factory Aiming : Front Camera Image Signal Error/Factory Aiming : Rear Camera Image Signal Error/Factory Aiming : Left Camera Image Signal Error/Factory Aiming : Right Camera Image Signal Error/Factory Aiming : Left Front Door Open/Factory Aiming : Left Rear Door Open /Factory Aiming : Right Front Door Open /Factory Aiming : Right Rear Door Open /Factory Aiming : Trunk/Liftgate Open /Factory Aiming : Neither "PARKED" Nor "NEUTRAL"/Factory Aiming : Front Camera Target A Not Detected/Factory Aiming : Front Camera Target B Not Detected/Factory Aiming : Rear Camera Target G Not Detected/Factory Aiming : Rear Camera Target H Not Detected/Factory Aiming : Left Camera Target
C Not Detected/Factory Aiming : Left Camera Target E Not Detected/Factory Aiming : Right Camera Target D Not Detected/Factory Aiming : Right Camera Target F Not Detected/Factory Aiming : Front Camera Analysis Error/Factory Aiming : Rear Camera Analysis Error/Factory Aiming : Left Camera Analysis Error/Factory Aiming : Right Camera Analysis Error/Dealer Aiming : Aiming Success/Dealer Aiming : Right Marker for Rear Camera Not Found/Dealer Aiming : Left Marker for Rear Camera Not Found /Dealer Aiming : Rear Marker for Left Camera Not Found /Dealer Aiming : Front Marker for Left Camera Not Found /Dealer Aiming : Left Marker for Front Camera Not Found /Dealer Aiming : Right Marker for Front Camera Not Found /Dealer Aiming : Front Marker for Right Camera Not Found /Dealer Aiming : Rear Marker for Right Camera Not Found /Dealer Aiming : Aiming Result Exceeds the Limit/Dealer Aiming : Aiming Not Performed/Dealer Aiming : Aiming Failed by Internal Memory Error/Dealer Aiming : Rear Camera
Image Not Input/Dealer Aiming : Left Camera Image Not Input/Dealer Aiming : Front Camera Image Not Input/Dealer Aiming : Right Camera Image Not Input/Dealer Aiming : Power Supply Error to Camera(s)
|
Displays detected error code after detecting differences between aiming result of rear mount camera and configuration data
|
—
|
|
BCAM_DIF_X
|
mm
|
Displays difference between design value of rear mount camera installation position (x-axis) and rear mount camera installation position (x-axis) after aiming
|
—
|
|
BCAM_DIF_Y
|
mm
|
Displays difference between design value of rear mount camera installation position (y-axis) and rear mount camera installation position (y-axis) after aiming
|
—
|
|
BCAM_DIF_Z
|
mm
|
Displays difference between design value of rear mount camera installation position (z-axis) and rear mount camera installation position (z-axis) after aiming
|
—
|
|
FCAM_AIM_ANS
|
NONE/COMPLETE/ERROR
|
• NONE: Front camera aiming is not performed.
• COMPLETE: Front camera aiming is completed.
• ERROR: Front camera aiming is not completed correctly.
|
—
|
|
FCAM_AIM_ANS_2
|
NONE/COMPLETE/ERROR
|
• NONE: Front camera aiming is not performed.
• COMPLETE: Differences between aiming result of front camera and configuration data is normal.
• ERROR: Differences between aiming result of front camera and configuration data is not normal.
|
—
|
|
FCAM_AIM_ERROR_CODE
|
Factory Aiming : Completed/Factory Aiming : ECU Internal Error/Factory Aiming : Front Camera Power Supply Error/Factory Aiming : Rear Camera Power Supply Error/Factory Aiming : Left Camera Power Supply Error/Factory Aiming : Right Camera Power Supply Error/Factory Aiming : Front Camera Image Signal Error/Factory Aiming : Rear Camera Image Signal Error/Factory Aiming : Left Camera Image Signal Error/Factory Aiming : Right Camera Image Signal Error/Factory Aiming : Left Front Door Open/Factory Aiming : Left Rear Door Open /Factory Aiming : Right Front Door Open /Factory Aiming : Right Rear Door Open /Factory Aiming : Trunk/Liftgate Open /Factory Aiming : Neither "PARKED" Nor "NEUTRAL"/Factory Aiming : Front Camera Target A Not Detected/Factory Aiming : Front Camera Target B Not Detected/Factory Aiming : Rear Camera Target G Not Detected/Factory Aiming : Rear Camera Target H Not Detected/Factory Aiming : Left Camera Target
C Not Detected/Factory Aiming : Left Camera Target E Not Detected/Factory Aiming : Right Camera Target D Not Detected/Factory Aiming : Right Camera Target F Not Detected/Factory Aiming : Front Camera Analysis Error/Factory Aiming : Rear Camera Analysis Error/Factory Aiming : Left Camera Analysis Error/Factory Aiming : Right Camera Analysis Error/Dealer Aiming : Aiming Success/Dealer Aiming : Right Marker for Rear Camera Not Found/Dealer Aiming : Left Marker for Rear Camera Not Found /Dealer Aiming : Rear Marker for Left Camera Not Found /Dealer Aiming : Front Marker for Left Camera Not Found /Dealer Aiming : Left Marker for Front Camera Not Found /Dealer Aiming : Right Marker for Front Camera Not Found /Dealer Aiming : Front Marker for Right Camera Not Found /Dealer Aiming : Rear Marker for Right Camera Not Found /Dealer Aiming : Aiming Result Exceeds the Limit/Dealer Aiming : Aiming Not Performed/Dealer Aiming : Aiming Failed by Internal Memory Error/Dealer Aiming : Rear Camera
Image Not Input/Dealer Aiming : Left Camera Image Not Input/Dealer Aiming : Front Camera Image Not Input/Dealer Aiming : Right Camera Image Not Input/Dealer Aiming : Power Supply Error to Camera(s)
|
Displays detected error code after performing front camera aiming
|
—
|
|
FCAM_AIM_ERROR_CODE_2
|
Factory Aiming : Completed/Factory Aiming : ECU Internal Error/Factory Aiming : Front Camera Power Supply Error/Factory Aiming : Rear Camera Power Supply Error/Factory Aiming : Left Camera Power Supply Error/Factory Aiming : Right Camera Power Supply Error/Factory Aiming : Front Camera Image Signal Error/Factory Aiming : Rear Camera Image Signal Error/Factory Aiming : Left Camera Image Signal Error/Factory Aiming : Right Camera Image Signal Error/Factory Aiming : Left Front Door Open/Factory Aiming : Left Rear Door Open /Factory Aiming : Right Front Door Open /Factory Aiming : Right Rear Door Open /Factory Aiming : Trunk/Liftgate Open/Factory Aiming : Neither "PARKED" Nor "NEUTRAL"/Factory Aiming : Front Camera Target A Not Detected/Factory Aiming : Front Camera Target B Not Detected/Factory Aiming : Rear Camera Target G Not Detected/Factory Aiming : Rear Camera Target H Not Detected/Factory Aiming : Left Camera Target
C Not Detected/Factory Aiming : Left Camera Target E Not Detected/Factory Aiming : Right Camera Target D Not Detected/Factory Aiming : Right Camera Target F Not Detected/Factory Aiming : Front Camera Analysis Error/Factory Aiming : Rear Camera Analysis Error/Factory Aiming : Left Camera Analysis Error/Factory Aiming : Right Camera Analysis Error/Dealer Aiming : Aiming Success/Dealer Aiming : Right Marker for Rear Camera Not Found/Dealer Aiming : Left Marker for Rear Camera Not Found /Dealer Aiming : Rear Marker for Left Camera Not Found /Dealer Aiming : Front Marker for Left Camera Not Found /Dealer Aiming : Left Marker for Front Camera Not Found /Dealer Aiming : Right Marker for Front Camera Not Found /Dealer Aiming : Front Marker for Right Camera Not Found /Dealer Aiming : Rear Marker for Right Camera Not Found /Dealer Aiming : Aiming Result Exceeds the Limit/Dealer Aiming : Aiming Not Performed/Dealer Aiming : Aiming Failed by Internal Memory Error/Dealer Aiming : Rear Camera
Image Not Input/Dealer Aiming : Left Camera Image Not Input/Dealer Aiming : Front Camera Image Not Input/Dealer Aiming : Right Camera Image Not Input/Dealer Aiming : Power Supply Error to Camera(s)
|
Displays detected error code after detecting differences between aiming result of front camera and configuration data
|
—
|
|
FCAM_DIF_X
|
mm
|
Displays difference between design value of front camera installation position (x-axis) and front camera installation position (x-axis) after aiming
|
—
|
|
FCAM_DIF_Y
|
mm
|
Displays difference between design value of front camera installation position (y-axis) and front camera installation position (y-axis) after aiming
|
—
|
|
FCAM_DIF_Z
|
mm
|
Displays difference between design value of front camera installation position (z-axis) and front camera installation position (z-axis) after aiming
|
—
|
|
LCAM_AIM_ANS
|
NONE/COMPLETE/ERROR
|
• NONE: Side camera (LH) aiming is not performed.
• COMPLETE: Side camera (LH) aiming is completed.
• ERROR: Side camera (LH) aiming is not completed correctly.
|
—
|
|
LCAM_AIM_ANS_2
|
NONE/COMPLETE/ERROR
|
• NONE: Side camera (LH) aiming is not performed.
• COMPLETE: Differences between aiming result of side camera (LH) and configuration data is normal.
• ERROR: Differences between aiming result of side camera (LH) and configuration data is not normal.
|
—
|
|
LCAM_AIM_ERROR_CODE
|
Factory Aiming : Completed/Factory Aiming : ECU Internal Error/Factory Aiming : Front Camera Power Supply Error/Factory Aiming : Rear Camera Power Supply Error/Factory Aiming : Left Camera Power Supply Error/Factory Aiming : Right Camera Power Supply Error/Factory Aiming : Front Camera Image Signal Error/Factory Aiming : Rear Camera Image Signal Error/Factory Aiming : Left Camera Image Signal Error/Factory Aiming : Right Camera Image Signal Error/Factory Aiming : Left Front Door Open/Factory Aiming : Left Rear Door Open /Factory Aiming : Right Front Door Open /Factory Aiming : Right Rear Door Open /Factory Aiming : Trunk/Liftgate Open/Factory Aiming : Neither "PARKED" Nor "NEUTRAL"/Factory Aiming : Front Camera Target A Not Detected/Factory Aiming : Front Camera Target B Not Detected/Factory Aiming : Rear Camera Target G Not Detected/Factory Aiming : Rear Camera Target H Not Detected/Factory Aiming : Left Camera Target
C Not Detected/Factory Aiming : Left Camera Target E Not Detected/Factory Aiming : Right Camera Target D Not Detected/Factory Aiming : Right Camera Target F Not Detected/Factory Aiming : Front Camera Analysis Error/Factory Aiming : Rear Camera Analysis Error/Factory Aiming : Left Camera Analysis Error/Factory Aiming : Right Camera Analysis Error/Dealer Aiming : Aiming Success/Dealer Aiming : Right Marker for Rear Camera Not Found/Dealer Aiming : Left Marker for Rear Camera Not Found /Dealer Aiming : Rear Marker for Left Camera Not Found /Dealer Aiming : Front Marker for Left Camera Not Found /Dealer Aiming : Left Marker for Front Camera Not Found /Dealer Aiming : Right Marker for Front Camera Not Found /Dealer Aiming : Front Marker for Right Camera Not Found /Dealer Aiming : Rear Marker for Right Camera Not Found /Dealer Aiming : Aiming Result Exceeds the Limit/Dealer Aiming : Aiming Not Performed/Dealer Aiming : Aiming Failed by Internal Memory Error/Dealer Aiming : Rear Camera
Image Not Input/Dealer Aiming : Left Camera Image Not Input/Dealer Aiming : Front Camera Image Not Input/Dealer Aiming : Right Camera Image Not Input/Dealer Aiming : Power Supply Error to Camera(s)
|
Displays detected error code after performing side camera (LH) aiming
|
—
|
|
LCAM_AIM_ERROR_CODE_2
|
Factory Aiming : Completed/Factory Aiming : ECU Internal Error/Factory Aiming : Front Camera Power Supply Error/Factory Aiming : Rear Camera Power Supply Error/Factory Aiming : Left Camera Power Supply Error/Factory Aiming : Right Camera Power Supply Error/Factory Aiming : Front Camera Image Signal Error/Factory Aiming : Rear Camera Image Signal Error/Factory Aiming : Left Camera Image Signal Error/Factory Aiming : Right Camera Image Signal Error/Factory Aiming : Left Front Door Open/Factory Aiming : Left Rear Door Open /Factory Aiming : Right Front Door Open /Factory Aiming : Right Rear Door Open /Factory Aiming : Trunk/Liftgate Open /Factory Aiming : Neither "PARKED" Nor "NEUTRAL"/Factory Aiming : Front Camera Target A Not Detected/Factory Aiming : Front Camera Target B Not Detected/Factory Aiming : Rear Camera Target G Not Detected/Factory Aiming : Rear Camera Target H Not Detected/Factory Aiming : Left Camera Target
C Not Detected/Factory Aiming : Left Camera Target E Not Detected/Factory Aiming : Right Camera Target D Not Detected/Factory Aiming : Right Camera Target F Not Detected/Factory Aiming : Front Camera Analysis Error/Factory Aiming : Rear Camera Analysis Error/Factory Aiming : Left Camera Analysis Error/Factory Aiming : Right Camera Analysis Error/Dealer Aiming : Aiming Success/Dealer Aiming : Right Marker for Rear Camera Not Found/Dealer Aiming : Left Marker for Rear Camera Not Found /Dealer Aiming : Rear Marker for Left Camera Not Found /Dealer Aiming : Front Marker for Left Camera Not Found /Dealer Aiming : Left Marker for Front Camera Not Found /Dealer Aiming : Right Marker for Front Camera Not Found /Dealer Aiming : Front Marker for Right Camera Not Found /Dealer Aiming : Rear Marker for Right Camera Not Found /Dealer Aiming : Aiming Result Exceeds the Limit/Dealer Aiming : Aiming Not Performed/Dealer Aiming : Aiming Failed by Internal Memory Error/Dealer Aiming : Rear Camera
Image Not Input/Dealer Aiming : Left Camera Image Not Input/Dealer Aiming : Front Camera Image Not Input/Dealer Aiming : Right Camera Image Not Input/Dealer Aiming : Power Supply Error to Camera(s)
|
Displays detected error code after detecting differences between aiming result of side camera (LH) and configuration data
|
—
|
|
LCAM_DIF_X
|
mm
|
Displays difference between design value of side camera (LH) installation position (x-axis) and side camera (LH) installation position (x-axis) after aiming
|
—
|
|
LCAM_DIF_Y
|
mm
|
Displays difference between design value of side camera (LH) installation position (y-axis) and side camera (LH) installation position (y-axis) after aiming
|
—
|
|
LCAM_DIF_Z
|
mm
|
Displays difference between design value of side camera (LH) installation position (z-axis) and side camera (LH) installation position (z-axis) after aiming
|
—
|
|
RCAM_AIM_ANS
|
NONE/COMPLETE/ERROR
|
• NONE: Side camera (RH) aiming is not performed.
• COMPLETE: Side camera (RH) aiming is completed.
• ERROR: Side camera (RH) aiming is not completed correctly.
|
—
|
|
RCAM_AIM_ANS_2
|
NONE/COMPLETE/ERROR
|
• NONE: Side camera (RH) aiming is not performed.
• COMPLETE: Differences between aiming result of side camera (RH) and configuration data is normal.
• ERROR: Differences between aiming result of side camera (RH) and configuration data is not normal.
|
—
|
|
RCAM_AIM_ERROR_CODE
|
Factory Aiming : Completed/Factory Aiming : ECU Internal Error/Factory Aiming : Front Camera Power Supply Error/Factory Aiming : Rear Camera Power Supply Error/Factory Aiming : Left Camera Power Supply Error/Factory Aiming : Right Camera Power Supply Error/Factory Aiming : Front Camera Image Signal Error/Factory Aiming : Rear Camera Image Signal Error/Factory Aiming : Left Camera Image Signal Error/Factory Aiming : Right Camera Image Signal Error/Factory Aiming : Left Front Door Open/Factory Aiming : Left Rear Door Open /Factory Aiming : Right Front Door Open /Factory Aiming : Right Rear Door Open /Factory Aiming : Trunk/Liftgate Open /Factory Aiming : Neither "PARKED" Nor "NEUTRAL"/Factory Aiming : Front Camera Target A Not Detected/Factory Aiming : Front Camera Target B Not Detected/Factory Aiming : Rear Camera Target G Not Detected/Factory Aiming : Rear Camera Target H Not Detected/Factory Aiming : Left Camera Target
C Not Detected/Factory Aiming : Left Camera Target E Not Detected/Factory Aiming : Right Camera Target D Not Detected/Factory Aiming : Right Camera Target F Not Detected/Factory Aiming : Front Camera Analysis Error/Factory Aiming : Rear Camera Analysis Error/Factory Aiming : Left Camera Analysis Error/Factory Aiming : Right Camera Analysis Error/Dealer Aiming : Aiming Success/Dealer Aiming : Right Marker for Rear Camera Not Found/Dealer Aiming : Left Marker for Rear Camera Not Found /Dealer Aiming : Rear Marker for Left Camera Not Found /Dealer Aiming : Front Marker for Left Camera Not Found /Dealer Aiming : Left Marker for Front Camera Not Found /Dealer Aiming : Right Marker for Front Camera Not Found /Dealer Aiming : Front Marker for Right Camera Not Found /Dealer Aiming : Rear Marker for Right Camera Not Found /Dealer Aiming : Aiming Result Exceeds the Limit/Dealer Aiming : Aiming Not Performed/Dealer Aiming : Aiming Failed by Internal Memory Error/Dealer Aiming : Rear Camera
Image Not Input/Dealer Aiming : Left Camera Image Not Input/Dealer Aiming : Front Camera Image Not Input/Dealer Aiming : Right Camera Image Not Input/Dealer Aiming : Power Supply Error to Camera(s)
|
Displays detected error code after performing side camera (RH) aiming
|
—
|
|
RCAM_AIM_ERROR_CODE_2
|
Factory Aiming : Completed/Factory Aiming : ECU Internal Error/Factory Aiming : Front Camera Power Supply Error/Factory Aiming : Rear Camera Power Supply Error/Factory Aiming : Left Camera Power Supply Error/Factory Aiming : Right Camera Power Supply Error/Factory Aiming : Front Camera Image Signal Error/Factory Aiming : Rear Camera Image Signal Error/Factory Aiming : Left Camera Image Signal Error/Factory Aiming : Right Camera Image Signal Error/Factory Aiming : Left Front Door Open/Factory Aiming : Left Rear Door Open /Factory Aiming : Right Front Door Open /Factory Aiming : Right Rear Door Open /Factory Aiming : Trunk/Liftgate Open /Factory Aiming : Neither "PARKED" Nor "NEUTRAL"/Factory Aiming : Front Camera Target A Not Detected/Factory Aiming : Front Camera Target B Not Detected/Factory Aiming : Rear Camera Target G Not Detected/Factory Aiming : Rear Camera Target H Not Detected/Factory Aiming : Left Camera Target
C Not Detected/Factory Aiming : Left Camera Target E Not Detected/Factory Aiming : Right Camera Target D Not Detected/Factory Aiming : Right Camera Target F Not Detected/Factory Aiming : Front Camera Analysis Error/Factory Aiming : Rear Camera Analysis Error/Factory Aiming : Left Camera Analysis Error/Factory Aiming : Right Camera Analysis Error/Dealer Aiming : Aiming Success/Dealer Aiming : Right Marker for Rear Camera Not Found/Dealer Aiming : Left Marker for Rear Camera Not Found /Dealer Aiming : Rear Marker for Left Camera Not Found /Dealer Aiming : Front Marker for Left Camera Not Found /Dealer Aiming : Left Marker for Front Camera Not Found /Dealer Aiming : Right Marker for Front Camera Not Found /Dealer Aiming : Front Marker for Right Camera Not Found /Dealer Aiming : Rear Marker for Right Camera Not Found /Dealer Aiming : Aiming Result Exceeds the Limit/Dealer Aiming : Aiming Not Performed/Dealer Aiming : Aiming Failed by Internal Memory Error/Dealer Aiming : Rear Camera
Image Not Input/Dealer Aiming : Left Camera Image Not Input/Dealer Aiming : Front Camera Image Not Input/Dealer Aiming : Right Camera Image Not Input/Dealer Aiming : Power Supply Error to Camera(s)
|
Displays detected error code after detecting differences between aiming result of side camera (RH) and configuration data
|
—
|
|
RCAM_DIF_X
|
mm
|
Displays difference between design value of side camera (RH) installation position (x-axis) and side camera (RH) installation position (x-axis) after aiming
|
—
|
|
RCAM_DIF_Y
|
mm
|
Displays difference between design value of side camera (RH) installation position (y-axis) and side camera (RH) installation position (y-axis) after aiming
|
—
|
|
RCAM_DIF_Z
|
mm
|
Displays difference between design value of side camera (RH) installation position (z-axis) and side camera (RH) installation position (z-axis) after aiming
|
—
|
|
VPWR
|
V
|
Displays 360°view monitor control module power supply voltage
|
—
|