TRAFFIC SIGN IS NOT DISPLAYED [INTELLIGENT SPEED ASSISTANCE (ISA)]

id1503d8030100

Note

• Due to environmental effects, the system behavior may differ from the driver’s intentions even though the vehicle has no malfunction. To perform symptom troubleshooting, an understanding of the applicable system from the new vehicle instruction is required. For details on the control conditions of the system, refer to the [INTELLIGENT SPEED ASSISTANCE (ISA)] operation in the service highlights/technical guide.

Outline

Description

•  The traffic sign is not indicated on the active driving display or instrument cluster while the vehicle is being driven.

•  The traffic sign indicated on the active driving display or instrument cluster turns off while the vehicle is being driven.

Possible cause

•  Personalization feature not set

•  BCM malfunction

•  Active driving display malfunction

•  Instrument cluster malfunction

•  Forward sensing camera (FSC) malfunction

Diagnostic Procedure

Step

Inspection

Action

1

VERIFY ALL SYSTEM DTCs

•  Perform the DTC inspection.
(See DTC INSPECTION.)

•  Are any DTCs displayed?

Yes

Repair the malfunctioning location according to the applicable DTC troubleshooting.

No

Go to the next step.

2

VERIFY PERSONALIZATION FEATURES SETTING

•  Verify the [notification and warning volume] using the personalization features.

Note

•  For personalization features setting using the center display, refer to Mazda Connect's [PERSONALIZATION FEATURES].

•  Has the traffic sign recognition been turned off?

Yes

Complete the symptom troubleshooting. (Explain the system operation conditions to the customer.)

No

Go to the next step.

Repair completion verification

VERIFY THAT VEHICLE IS REPAIRED

•  Install/connect the part removed/disconnected during the troubleshooting procedure.

•  Has the malfunction symptom been eliminated?

Yes

Complete the symptom troubleshooting. (Explain contents of repair to customer)

No

Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.

(See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].)

If the CAN communication is normal, perform the diagnosis from Step 1.

•  If the malfunction is not resolved, replace the forward sensing camera (FSC).
(See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION.)

Description	• The traffic sign is not indicated on the active driving display or instrument cluster while the vehicle is being driven. • The traffic sign indicated on the active driving display or instrument cluster turns off while the vehicle is being driven.
Possible cause	• Personalization feature not set • BCM malfunction • Active driving display malfunction • Instrument cluster malfunction • Forward sensing camera (FSC) malfunction

Step	Inspection		Action
1	VERIFY ALL SYSTEM DTCs • Perform the DTC inspection. (See DTC INSPECTION.) • Are any DTCs displayed?	Yes	Repair the malfunctioning location according to the applicable DTC troubleshooting.
1		No	Go to the next step.
2	VERIFY PERSONALIZATION FEATURES SETTING • Verify the [notification and warning volume] using the personalization features. Note • For personalization features setting using the center display, refer to Mazda Connect's [PERSONALIZATION FEATURES]. • Has the traffic sign recognition been turned off?	Yes	Complete the symptom troubleshooting. (Explain the system operation conditions to the customer.)
2		No	Go to the next step.
Repair completion verification	VERIFY THAT VEHICLE IS REPAIRED • Install/connect the part removed/disconnected during the troubleshooting procedure. • Has the malfunction symptom been eliminated?	Yes	Complete the symptom troubleshooting. (Explain contents of repair to customer)
Repair completion verification		No	Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error. (See CONTROLLER AREA NETWORK (CAN) MALFUNCTION DIAGNOSIS FLOW [(E)].) If the CAN communication is normal, perform the diagnosis from Step 1. • If the malfunction is not resolved, replace the forward sensing camera (FSC). (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION.)