360°VIEW MONITOR CONTROL MODULE INSPECTION

id152000009500

Note

•  The integrity of the 360° view monitor control module cannot be determined from a single part. When inspecting the 360° view monitor control module, perform the following procedure.

1.  Connect the M-MDS to the DLC-2.

2.  Perform the DTC inspection for the 360° view monitor control module and verify if any DTCs related to the 360° view monitor control module is detected. (See DTC INSPECTION.)

•  If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting.

(See DTC TABLE [360°VIEW MONITOR CONTROL MODULE (E)].)