DRIVE BELT INSPECTION [ZY, Z6]

id0110b0801500

Note

•  Drive belt deflection/tension inspection is not necessary because of the use of the drive belt auto tensioner.

1.  Remove the splash shield (RH). (See SPLASH SHIELD REMOVAL/INSTALLATION.)

2.  Verify that the drive belt auto tensioner indicator mark does not exceed the limit.

am2zzw00001635

•  If it exceeds the limit, replace the drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [ZY, Z6].)

3.  Visually inspect the drive belt.

•  If any of the following damage occurs to the drive belt, replace the drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [ZY, Z6].)

―  Cracks

―  Foreign material caught in mechanism

―  Belt loss