REAR OIL SEAL REPLACEMENT [MZ-CD 1.6 (Y6) (EURO5 emission level)]

id0110e5800900

1.  Remove the manual transaxle (See MANUAL TRANSAXLE REMOVAL/INSTALLATION [B76M-R].)

2.  Remove the flywheel (See CLUTCH UNIT REMOVAL/INSTALLATION [B76M-R].)

3.  Remove in the order indicated in the table.

4.  Install in the reverse order of removal.

b3e0110e218

1	Rear oil seal (See Rear Oil Seal Removal Note.) (See Rear Oil Seal Installation Note.)

Rear Oil Seal Removal Note

1.  Remove the rear oil seal using a flathead screwdriver with the tip protected by a rag.

Rear Oil Seal Installation Note

1.  Apply clean engine oil to a new rear oil seal.

2.  Set the SSTs.

b3e0110e219

3.  Position the rear oil seal on the SST.

Note

•  A rear oil seal oil seal is supplied with an alignment sleeve which must be removed during the following installation.

b3e0110e220

4.  Install the rear oil seal using the SSTs.

am2zzw00003996