ACCELERATOR PEDAL REMOVAL/INSTALLATION [ZY, Z6]

id0113b0801400

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [ZY, Z6].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [ZY, Z6].)

3.  Remove the dashboard under cover. (if equipped)(See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

4.  Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION.)

5.  Remove in the order indicated in the table.

am3zzw00009783

1	APP sensor connector
2	Accelerator pedal

6.  Install in the reverse order of removal.