INTAKE SHUTTER VALVE INSPECTION [MZR-CD 2.2]

id0116f2093500


Resistance Inspection

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

2.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [MZR-CD 2.2].)

3.  Disconnect the intake shutter valve connector.

4.  Measure the resistance between the intake shutter valve terminals A and B.

am5ezw00000857

Intake shutter valve actuator resistance
0.3—100 ohms [20°C {68°F}]
•  If not within the specification, replace the intake shutter valve. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR-CD 2.2].)