GENERATOR DISASSEMBLY/ASSEMBLY [ZY, Z6]

id0117a0800400

Caution
•  Melt the solder quickly, otherwise the diodes (rectifier) and regulator will be damaged by excessive heat.

1.  Disassemble in the order indicated in the table.

2.  Assemble in the reverse order of disassembly.

ZY, Z6 (European (L.H.D. U.K.) specs. (except for Israel))

am3zzw00006360

1
Rotor component
2
Stator coil component
3
Generator bearing cover
4
Pulley
(See Pulley Disassembly/Assembly Note.)
5
Rotor
6
Front bearing
7
Front cover
8
Stator coil
9
Rectifier
10
Regulator component
11
Rear cover

Z6 (General (L.H.D. R.H.D.) specs., Israel, China)

am3zzw00007882

1
Rotor component
2
Stator coil component
3
Pulley
4
Rotor
5
Front bearing
6
Front cover
7
Stator coil
8
Rectifier
9
Regulator component
10
Rear cover


Pulley Disassembly/Assembly Note

1.  Disassemble/assemble the pulley using the SST.

am3zzw00006361

Tightening torque
60—85 N·m {6.2—8.6 kgf·m, 45—62 ft·lbf}