ACCELERATOR PEDAL POSITION (APP) SENSOR INSPECTION [ZY, Z6]

id0140a0803200

1.  Connect the M-MDS to the DLC‐2.

am3uuw00002396

2.  Switch the ignition to ON.

3.  Verify that the APP sensor output voltage (PID: APP1, APP2) increases according to the increase in the accelerator opening angle when the accelerator opening angle is gradually increased.

•  If verified, go to the next step.

•  If not as verified, replace the accelerator pedal. (See ACCELERATOR PEDAL POSITION (APP) SENSOR REMOVAL/INSTALLATION [ZY, Z6].)

4.  Verify that the APP sensor output voltage (PID: APP1, APP2) is within the specification when the accelerator pedal is depressed and not depressed.

•  If not as specified, replace the accelerator pedal. (See ACCELERATOR PEDAL POSITION (APP) SENSOR REMOVAL/INSTALLATION [ZY, Z6].)