FUEL TEMPERATURE SENSOR INSPECTION [MZR-CD 2.2]

id0140f2806400

Note
•  Perform the following test only when directed.

Resistance Inspection

1.  Disconnect the negative battery cable.

2.  Remove the supply pump. (See SUPPLY PUMP REMOVAL/INSTALLATION [MZR-CD 2.2].)

3.  Measure the resistance between the fuel temperature sensor terminals using an ohmmeter.

•  If not as specified, repair the supply pump. (See SUPPLY PUMP REMOVAL/INSTALLATION [MZR-CD 2.2].)

Specification

Ambient temperature

(°C {°F})

Resistance (kilohm)
20 {68}
2.32—2.59

am3zzw00005377