BATTERY FLUID TEMPERATURE SENSOR INSPECTION [MZR 2.0 DISI i-stop]

id0140j1889300

1.  Connect the M-MDS to the DLC‐2.

am3uuw00002394

2.  Switch the ignition to ON.

3.  Verify that the voltage (M-MDS PID: BATT_TEMP) within the specification. (See PCM INSPECTION [MZR 2.0 DISI i-stop].)

•  If not as specified, replace the current sensor No.1.

(See CURRENT SENSOR REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)