POWER BRAKE UNIT VACUUM SENSOR INSPECTION [MZR 2.0 DISI i-stop]

id0140j1889400

1.  Connect the M-MDS to the DLC‐2.

am3uuw00002394

2.  Switch the ignition to ON.

3.  Verify that the voltage (M-MDS PID: BBP) within the specification. (See PCM INSPECTION [MZR 2.0 DISI i-stop].)

•  If not as specified, replace the power brake unit vacuum sensor.

(See POWER BRAKE UNIT REMOVAL/INSTALLATION (L.H.D.) [Z6, LF, MZR 2.0 DISI i-stop, MZ-CD 1.6 (Y6), MZR-CD 2.2].)

(See POWER BRAKE UNIT REMOVAL/INSTALLATION (R.H.D.) [MZR 2.0 DISI i-stop].)