ON-BOARD DIAGNOSTIC SYSTEM ACTIVE COMMAND MODES FUNCTION [DYNAMIC STABILITY CONTROL (DSC)]

id0402b2181500

•  The active command modes function is used for optionally selecting simulation items of input/output parts preset in the DSC HU/CM, and to operate them regardless of CM control.
•  To protect the hydraulic unit interior, operate output related parts for only 2 s or less when using the active command modes function.

ACTIVE COMMAND MODE TABLE

Command name

Output part name

Operation

Operating condition
PMP_MTR
Pump motor
Off/On
Switch the ignition to ON
V_LF_INT
LF inlet solenoid valve)
V_LF_OTL
LF outlet solenoid valve
V_LR_INT
LR inlet solenoid valve
V_LR_OTL
LR outlet solenoid valve
V_RF_INT
RF inlet solenoid valve
V_RF_OTL
RF outlet solenoid valve
V_RR_INT
RR inlet solenoid valve
V_RR_OTL
RR outlet solenoid valve
V_STB_L
Left stability control solenoid valve
V_STB_R
Right stability control solenoid valve
V_TRC_L
Left traction control solenoid valve
V_TRC_R
Right traction control solenoid valve