DYNAMIC STABILITY CONTROL (DSC) CONSTRUCTION

• Vehicles with combined sensor: Applied VIN (assumed)

European (L.H.D. U.K.) specs.

• JMZ BL12F60# 100001—181415

• JMZ BL12F70# 100001—181415

• JMZ BL12Y20# 100001—181415

• JMZ BL12Z20# 100001—181415

• JMZ BL12Z50# 100001—181415

• JMZ BL14F60# 100001—181415

• JMZ BL14F70# 100001—181415

• JMZ BL14Y20# 100001—181415

• JMZ BL14Z20# 100001—181415

• JMZ BL14Z50# 100001—181415

• JMZ BLA2A60# 100001—181415

• JMZ BLA2C60# 100001—181415

• JMZ BLA2F70# 100001—181415

• JMZ BLA2G60# 100001—181415

• JMZ BLA2Y60# 100001—181415

• JMZ BLA2Z20# 100001—181415

• JMZ BLA2Z50# 100001—181415

• JMZ BLA4360# 100001—181415

• JMZ BLA4A60# 100001—181415

• JMZ BLA4C60# 100001—181415

• JMZ BLA4F70# 100001—181415

• JMZ BLA4G60# 100001—181415

• JMZ BLA4Y60# 100001—181415

• JMZ BLA4Z20# 100001—181415

• JMZ BLA4Z50# 100001—181415

Australian specs.

• JM0 BL103100 100001—225632

• JM0 BL10C100 100001—225632

• JM0 BL10F100 100001—225632

• JM0 BL10L100 100001—225632

General (R.H.D.) specs.

• JM6 BL1031*0 100001—225632

• JM6 BL1051*0 100001—225632

• JM6 BL10F1*0 100001—225632

• JM6 BL10L1*0 100001—225632

• JM6 BL10Z1*0 100001—225632

General (L.H.D.) specs., Arab Gulf Cooperation Council, China

• JM7 BL04F**# 100001—225632

• JM7 BL04Z**# 100001—225632

• JM7 BL12F**# 100001—225632

• JM7 BL12Z**# 100001—225632

• JM7 BL14F**# 100001—225632

• JM7 BL14Z**# 100001—225632

• JM7 BL22F**# 100001—225632

• JM7 BL22Z**# 100001—225632

• JM7 BL24F**# 100001—225632

• JM7 BL24Z**# 100001—225632

• Vehicles without combined sensor: Applied VIN (assumed)

European (L.H.D. U.K.) specs.

• JMZ BL12F60# 181416—

• JMZ BL12F70# 181416—

• JMZ BL12Y20# 181416—

• JMZ BL12Z20# 181416—

• JMZ BL12Z50# 181416—

• JMZ BL14F60# 181416—

• JMZ BL14F70# 181416—

• JMZ BL14Y20# 181416—

• JMZ BL14Z20# 181416—

• JMZ BL14Z50# 181416—

• JMZ BLA2A60# 181416—

• JMZ BLA2C60# 181416—

• JMZ BLA2F70# 181416—

• JMZ BLA2G60# 181416—

• JMZ BLA2Y60# 181416—

• JMZ BLA2Z20# 181416—

• JMZ BLA2Z50# 181416—

• JMZ BLA4360# 181416—

• JMZ BLA4A60# 181416—

• JMZ BLA4C60# 181416—

• JMZ BLA4F70# 181416—

• JMZ BLA4G60# 181416—

• JMZ BLA4Y60# 181416—

• JMZ BLA4Z20# 181416—

• JMZ BLA4Z50# 181416—

Australian specs.

• JM0 BL103100 225633—

• JM0 BL10C100 225633—

• JM0 BL10F100 225633—

• JM0 BL10L100 225633—

General (R.H.D.) specs.

• JM6 BL1031*0 225633—

• JM6 BL1051*0 225633—

• JM6 BL10F1*0 225633—

• JM6 BL10L1*0 225633—

• JM6 BL10Z1*0 225633—

General (L.H.D.) specs., Arab Gulf Cooperation Council, China

• JM7 BL04F**# 225633—

• JM7 BL04Z**# 225633—

• JM7 BL12F**# 225633—

• JM7 BL12Z**# 225633—

• JM7 BL14F**# 225633—

• JM7 BL14Z**# 225633—

• JM7 BL22F**# 225633—

• JM7 BL22Z**# 225633—

• JM7 BL24F**# 225633—

• JM7 BL24Z**# 225633—

Part name	Function
DSC HU/CM	• Makes calculations using input signals from each sensor, controls brake fluid pressure to each wheel, and actuates each function (ABS, Electronic Brakeforce Distribution (EBD), TCS, DSC, and brake assist control) of the DSC system. • Outputs the torque reduction request signal, wheel speed signal, and DSC system warning control data via CAN lines. • Controls the on-board diagnostic system and fail-safe function when there is a malfunction in the DSC system.
PCM	• Controls engine output based on signals from the DSC HU/CM. • Transmits engine speed, tire, and shift position data via CAN communication to the DSC HU/CM. • Transmits gear/selector lever position data via CAN communication to the DSC HU/CM. • Transmits brake pedal position data via CAN communication to the DSC HU/CM.
TCM (ATX (FS5A-EL))	• Transmits gear/selector lever position data via CAN communication to the DSC HU/CM.
BCM	• Transmits steering angle data via CAN communication to the DSC HU/CM.
DSC indicator light	• Informs the driver that the DSC is operating (vehicle sideslip occurring). • Informs the driver that the TCS is operating (drive wheel is spinning). • Informs the driver of DSC/TCS malfunction.
DSC OFF switch	• Transmits driver intention to release DSC control to the DSC HU/CM.
DSC OFF light	• Informs driver that DSC control has been released due to DSC OFF switch operation.
ABS wheel-speed sensor	• Detects the rotation condition of each wheel and transmits it to the DSC HU/CM.
Combined sensor (vehicles with combined sensor)	• Detects the lateral-G (vehicle lateral acceleration speed) and the yaw rate (vehicle turning angle speed) of the vehicle and transmits them to the DSC HU/CM.
SAS control module (vehicles without combined sensor)	• Transmits the lateral-G (vehicle lateral acceleration speed), and the yaw rate (vehicle turning angle speed) via CAN communication to the DSC HU/CM.
Brake fluid pressure sensor (Built into DSC HU/CM)	• Detects the fluid pressure from the master cylinder.