ON-BOARD DIAGNOSTIC SYSTEM FAIL-SAFE FUNCTION [FS5A-EL]


id050221280200


Function

•  In the fail-safe function, minimum vehicle drivability is obtained by changing the signals that are determined to be malfunctions by the malfunction detection function to the preset values, and limiting TCM control.

Fail-safe Table

DTC No.

Definition

Fail-safe

P06B8:00*
NVRAM malfunction
-
P0706:00
TR switch circuit range/performance
•  Inhibits 1GR, 4GR and 5GR
•  Inhibits feedback correction
P0707:00
TR switch circuit low input
•  Inhibits 1GR, 4GR and 5GR
•  Inhibits feedback correction
P0708:00
TR switch circuit high input
•  Inhibits 1GR, 4GR and 5GR
•  Inhibits feedback correction
P0711:00
TFT sensor circuit range/performance
-
P0712:00
TFT sensor circuit low input
•  Inhibits feedback correction
P0713:00
TFT sensor circuit high input
•  Inhibits feedback correction
P0715:00
Input/turbine speed sensor circuit malfunction
•  Inhibits shifting to 4GR from 3GR
•  Inhibits TCC control
•  Inhibits feedback correction
P0720:00
VSS circuit malfunction
•  Inhibits 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0731:00
Gear 1 incorrect ratio
•  Inhibits 1GR
•  Inhibits feedback correction
P0732:00
Gear 2 incorrect ratio
•  Inhibits 2GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0733:00
Gear 3 incorrect ratio
•  Inhibits feedback correction
P0734:00
Gear 4 incorrect ratio
•  Inhibits 4GR and 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0735:00
Gear 5 incorrect ratio
•  Inhibits 1GR, 2GR, 4GR and 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0741:00
TCC stuck off
•  Inhibits TCC control
•  Maximizes line pressure
•  Inhibits feedback correction
P0742:00
TCC stuck on
•  Inhibits TCC control
•  Maximizes line pressure
•  Inhibits feedback correction
P0744:00
TCC slip control malfunction
•  Inhibits slip control
•  Inhibits feedback correction
P0745:00
Pressure control solenoid A malfunction
•  Maximizes line pressure
•  Inhibits feedback correction
P0751:00
Shift solenoid A stuck off
•  Inhibits 4GR and 5GR
•  Inhibits TCC control
•  Maximizes line pressure
•  Inhibits feedback correction
P0752:00
Shift solenoid A stuck on
•  Inhibits 1GR, 2GR and 3GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0753:00
Shift solenoid A electrical malfunction
•  Inhibits 4GR and 5GR
•  Inhibits TCC control
•  Maximizes line pressure
•  Inhibits feedback correction
P0756:00
Shift solenoid B stuck off
•  Inhibits 1GR, 4GR and 5GR
•  Inhibits shifting from 2GR to 3GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0757:00
Shift solenoid B stuck on
•  Inhibits 2GR, 4GR and 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0758:00
Shift solenoid B electrical malfunction
•  Inhibits 1GR, 4GR and 5GR
•  Inhibits shifting from 2GR to 3GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0761:00
Shift solenoid C stuck off
•  Inhibits 1GR and 2GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0762:00
Shift solenoid C stuck on
•  Inhibits 3GR, 4GR and 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0763:00
Shift solenoid C electrical malfunction
•  Inhibits 1GR and 2GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0766:00
Shift solenoid D stuck off
•  Inhibits 4GR and 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0767:00
Shift solenoid D stuck on
•  Inhibits 2GR, 4GR and 5GR
•  Inhibits TCC control
•  Maximizes line pressure
•  Inhibits feedback correction
P0768:00
Shift solenoid D electrical malfunction
•  Inhibits 4GR and 5GR
•  Inhibits TCC control
•  Maximizes line pressure
•  Inhibits feedback correction
P0771:00
Shift solenoid E stuck off
•  Inhibits TCC control
•  Maximizes line pressure
•  Inhibits feedback correction
P0772:00
Shift solenoid E stuck on
•  Inhibits 1GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0773:00
Shift solenoid E electrical malfunction
•  Inhibits TCC control
•  Maximizes line pressure
•  Inhibits feedback correction
P0777:00
Pressure control solenoid B stuck on
•  Inhibits 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0778:00
Pressure control solenoid B electrical malfunction
•  Inhibits feedback correction
P0791:00
Intermediate sensor circuit malfunction
•  Inhibits feedback correction
P0841:00
Oil pressure switch circuit malfunction
•  Amount torque down request
P0882:00
Battery back-up voltage low
-
P0883:00
Battery voltage high
•  Inhibits 1GR, 2GR, 4GR and 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0884:00
Battery voltage low
•  Inhibits 1GR, 2GR, 4GR and 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P0894:00
Transaxle component slipping
•  Inhibits 1GR, 2GR and 3GR
•  Maximizes line pressure
•  Inhibits feedback correction
P1783:00
ATF high oil temperature malfunction
•  Inhibits feedback correction
P2707:00
Shift solenoid F stuck off
•  Inhibits 1GR, 2GR, 4GR and 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P2708:00
Shift solenoid F stuck on
•  Inhibits 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P2709:00
Shift solenoid F electrical malfunction
•  Inhibits 1GR, 2GR, 4GR and 5GR
•  Maximizes line pressure
•  Inhibits feedback correction
P2797:00
Electric AT oil pump
-
U0073:00
Control module communication bus off
-
U0100:00
Lost communication with PCM
-
U0121:00
Lost communication with ABS HU/CM or DSC HU/CM
-

*: Applied VIN (assumed):

JMZ BL12F70# 100001—131132
JMZ BL14F70# 100001—131132
JMZ BLA2F70# 100001—131132
JMZ BLA4F70# 100001—131132
JM0 BL10F100 100001—158446
JM0 BL10L100 100001—158446
JM6 BL10F1*0 100001—158446
JM7 BL04F**# 100001—131132
JM7 BL12F**# 100001—158446
JM7 BL22F**# 100001—158446