DTC DISPLAY [FULL-AUTO AIR CONDITIONER]

id0702c1801500

1.  Connect the M-MDS to the DLC-2.

am3uuw00003965

2.  Expose the solar radiation sensor to natural sunlight.

Note

•  If natural sunlight is not shone on the solar radiation sensor, the climate control unit determines a malfunction and indicates DTC “B1A63:12, B1A63:13, B1A64:12, B1A64:13”.

3.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select “Self Test”.

2.  Select “Modules”.

3.  Select “EATC”.

•  When using the PDS (Pocket PC)

1.  Select “Module Tests”.

2.  Select “EATC”.

3.  Select “Self Test”.

4.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

5.  After completion of repairs, clear all DTCs stored in the climate control unit. (See CLEARING DTC [FULL-AUTO AIR CONDITIONER].)