DTC INSPECTION [TYPE A]

id0802d3080500

1.  Connect the M-MDS to the DLC-2.

am3uuw00003641

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  Using the IDS (laptop PC)

1.  Select “Module programming”.

2.  Select “Programmable Module Installation”.

3.  Select “RCM”.

3.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

4.  After completion of repairs, clear all DTCs stored in the SAS control module. (See CLEARING DTC [TYPE A].)