DTC B1026:51 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]
id09021c387000
|
DESCRIPTION |
Steering lock unit programming error |
|---|---|
|
DETECTION CONDITION
|
• Keyless control module receives unprogrammed signal from the steering lock unit.
• No steering lock unit programming record in keyless control module.
|
|
POSSIBLE CAUSE
|
• Steering lock unit programming error
• Steering lock unit malfunction
• Keyless control module malfunction
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
PERFORM STEERING LOCK UNIT PROGRAMMING
• Perform the steering lock unit programming.
• Switch the ignition to off, then open the door to lock the steering.
• Clear the DTC from the keyless control module using the M-MDS.
• Operate the advanced key to activate the keyless control module.
• Perform the advanced keyless entry and push button start system DTC inspection using the M-MDS.
• Is the same DTC present?
|
Yes
|
Go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
2
|
INSPECT STEERING LOCK UNIT
• Inspect the steering lock unit.
• Is there any malfunction?
|
Yes
|
Replace the steering lock unit and perform the steering lock unit programming, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY TROUBLESHOOTING COMPLETED
• Switch the ignition to off, then open the door to lock the steering.
• Clear the DTC from the keyless control module using the M-MDS.
• Operate the advanced key to activate the keyless control module.
• Perform the advanced keyless entry and push button start system DTC inspection using the M-MDS.
• Is the same DTC present?
|
Yes
|
Replace the keyless control module, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||