DTC INSPECTION [INFORMATION DISPLAY/MULTI INFORMATION DISPLAY]


id0902k0960300

1.  Connect the M-MDS to the DLC-2.

am3uuw00002650

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (laptop PC)
1.  Select “Self Test”.
2.  Select “Modules”.
3.  Select “MID”.
•  When using the PDS (Pocket PC)
1.  Select “Module Tests”.
2.  Select “MID”.
3.  Select “Self Test”.

3.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

4.  After completion of repairs, clear all DTCs stored in the information display/multi information display. (See CLEARING DTC [INFORMATION DISPLAY/MULTI INFORMATION DISPLAY].)