MAP LIGHT REMOVAL/INSTALLATION

id091800801200

1.  Disconnect the negative battery cable.

2.  Remove in the order indicated in the table.

am3uuw00003222

1	Lens (See Lens Removal Note.)
2	Map light bulb
3	Map light (See Map Light Removal Note.)
4	Connector

3.  Install in the reverse order of removal.

Lens Removal Note

1.  Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver in the direction shown by the arrow to remove the lens.

am3uuw00004438

Map Light Removal Note

1.  Release the tabs by pressing them in the direction of the arrows in the figure and remove the map light.

am3uuw00004439