HAZARD WARNING SWITCH INSPECTION

id091800803100

1.  Disconnect the negative battery cable.

2.  Remove the center panel. (See CENTER PANEL REMOVAL/INSTALLATION.)

3.  Verify that the continuity between the hazard warning switch terminals is as indicated in the table.

am3uuw00002563

•  If not as indicated in the table, replace the hazard warning switch.

am3zzw00009844

4.  Apply battery voltage to hazard warning switch terminal A, and connect terminal F to ground.

5.  Verify that the LED illuminates.

•  If there is any malfunction, replace the hazard warning switch.