WASHER MOTOR INSPECTION

id091900805100

1.  Disconnect the negative battery cable.

2.  Remove the front mudguard (RH). (See FRONT MUDGUARD REMOVAL/INSTALLATION.)

3.  Disconnect the washer motor connector.

4.  After connecting washer motor terminal A to the positive battery terminal, and terminal B to the negative battery terminal, verify that washer fluid flows to the windshield washer hose.

am3zzw00009764

•  If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)

5.  After connecting washer motor terminal B to the positive battery terminal, and terminal A to the negative battery terminal, verify that washer fluid flows to the rear washer hose.(Vehicles with rear washer system.)

•  If there is any malfunction, replace the washer motor. (See WASHER MOTOR REMOVAL/INSTALLATION.)