ANTENNA FEEDER NO.3 INSPECTION

id092000813000

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(2)  Audio unit (See AUDIO UNIT REMOVAL/INSTALLATION.)

(3)  A-pillar trim (RH) (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

3.  Disconnect antenna feeder No.4.

am3zzw00005994

4.  Verify that the continuity between antenna feeder No.3 terminals is as indicated in the table.

am3zzw00006492

•  If not as indicated in the table, replace antenna feeder No.3.

am3zzw00006493