ANTENNA FEEDER NO.5 INSPECTION

id092000888100

1.  Disconnect the negative battery cable.

2.  Remove the following parts:

(1)  Front scuff plate (RH) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Front side trim (RH) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

(4)  Rear scuff plate (RH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(5)  Tire house trim (RH) (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

3.  Disconnect the antenna feeder No.2.

am3zzw00006040

4.  Disconnect the antenna feeder No.6.

am3zzw00006041

5.  Verify that the continuity between antenna feeder No.5 terminals is as indicated in the table.

am3zzw00006042

•  If not as indicated in the table, replace antenna feeder No.5.

am3zzw00006043