POWER SYSTEMS PERSONALIZATION FEATURES SETTING PROCEDURE


id092100468500

Note
•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the POWER SYSTEMS PERSONALIZATION FEATURES SETTING PROCEDURE.

1.  Connect the M-MDS to the DLC‐2.

am3uuw00003597

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

1.  Select the “Module Programming”.

3.  Then, select items from the screen menu in the following order.

1.  Select “Programmable Parameters”.
2.  Select “RKE”.

4.  Select an item name, and then select option.

M-MDS display

Function

Initial setting

Setting content

Control unit

ACC auto off
The function to automatically switch off the ignition after one hour has elapsed since the ignition was switched to ACC can be set to operable or inoperable.
Enabled
Disabled/Enabled
Keyless control module
Power off mode
The transition pattern in which the ignition position is switched by pressing the push button start can be selected.
Direct
Direct/Stepwise
Keyless control module