INFORMATION DISPLAY/MULTI INFORMATION DISPLAY CONFIGURATION

id092200028200

Note

•  Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the INFORMATION DISPLAY/MULTI INFORMATION DISPLAY CONFIGURATION.

1.  Connect the M-MDS to the DLC-2.

am3uuw00002621

2.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

1.  Select “Module Programming”

3.  Then, select items from the screen menu in the following order.

1.  Select “Programmable Module Installation”

2.  Select “MID”

4.  Perform the configuration following the instructions on the screen.

5.  Retrieve DTCs by the M-MDS, then verify that there is no DTC present.

•  If a DTC (s) is detected, perform the applicable DTC inspection. (See DTC TABLE [INFORMATION DISPLAY/MULTI INFORMATION DISPLAY].)